Would you like to ace your next VLSI – physical design interview and secure your dream job ?

Do you want to secure at least 3 to 4 job offers by succeeding at all the phone and on-site Job interviews for this position? Or you simply want most frequently asked VLSI interview questions with answers and digital design interview questions with answers ?

If so..

This Is Going To Be
The Most Important Message
You will Ever Read!

Did you know that people who made targeted question answer preparation for job interview are 4 times more likely to get job offer than those who don’t ? Did you also know that there is a set of questions that is likely to be repeatedly asked by interviewers across the industry, no matter who you talk with in the field of digital VLSI design ?

How valuable would be to get hold of that set of questions ? Do not worry, you’ve come to the right place for getting that set of questions and more importantly their answers. You see, you already have a upper hand in your job search, as you have been doing research about interviews and about what kind of questions are asked in interviews.

Let me tell you a bit about myself. I was not so lucky my friend. When I started doing interviews, I met with lots of rejections. I was not feeling much confident during interviews and I was getting cornered by some of the questions that were asked to me. I kept getting turned down. I was utterly disappointed.

I was extremely frustrated with my old job. I was tired of hostile work environment. I was overworked and underpaid. It was extremely stressful. I was feeling like I was stuck and rotting at old job. This is when a new job had to be found, there was no choice. But early interview setbacks were disappointing. I started thinking more and more as to why I was failing? What was wrong with me? The failure was very much unlike me.

I was always a top brass performer at my previous job and I did extremely well at school. I started thinking back as to what was going on. It did not take too long to realize that I wasn’t prepared well and

Was Getting Taken Aback By Surprising Questions.

Imagine what difference it makes when you’re faced with something you already know and have practiced!! I started doing research, first I collected all the questions that were asked to me, then I scoured the libraries and books and found all important common VLSI interview questions, digital design interview questions, verilog interview questions, static timing analysis interview questions, logic design interview questions, ASIC interview questions, fpga interview questions and I got answers to all those questions.

Later I asked all my friends and all my colleagues who were working in the VLSI design field doing ASIC design, static timing analysis, CMOS circuit design and who themselves were interviewers, for frequently asked questions and found out definitive answers to all those questions. That’s how I came up with the set of questions and answers that you’ll find here.

By then I had already secured exactly the type of job I was looking for. I gave this set of questions to my friends who were searching for job, and all of them found it extremely useful. They recommended me that I make this available to general public, that’s when I decided to make it available here. And now you can get full access to the same set of questions with answers.

But what about the questions that are available on the Internet for free? Why should I pay for it? Well my friend, would you leave something as important as a job interview to the chance? In such a bad economy? I agree, it’s possible to find some good information for free on Internet.

But most of the information on Internet is scattered, unorganized, outdated and not structured to be of value to someone like you. At times it could be outright wrong!! You’ve to make sure you get your information from a trusted, proven and very serious resource.

I believe so strongly in this set of question-answers, I provide complete unconditional guarantee. If you’re not satisfied with this product

You Get 100% Of Your Money Back !!

You get very carefully chosen 95 of the most important, most likely to be asked questions with illustrated answered, when it comes to interviewing in the field of digital ASIC design, static timing analysis and CMOS circuit design. Knowing answers to these questions will ensure that you get the job offer from your next interview.

You see, it is very important to have enough confidence in yourself while interviewing. By far confidence matters equally (if not more than) to the knowledge you posses. If you can confidently present yourself in the interview, you’ll very much impress your interviewer. So the question is how do you get that confidence ?

Imagine if you’ve done proper preparation and if you’ve gone through those tricky questions and know answers to them!! You’ll carry much more confidence with you that will immensely boost your chances of success at your interview.

How many times do we overlook the basics!! Especially if you have been working long enough at one place. These carefully selected questions brushes up on your basics knowledge about digital VLSI design. You’ll have your basics covered by the interview time with VLSI interview question.

Not only you get answers to important questions, but the document also explain how to go about tackling some of the trickiest questions. You’ll get to practice on important questions which in turn will flex your mental muscle and prepare you for the grueling of the interviews.

Here are some sample questions that have been discussed in the question answer set:

  • Everything you need to know about synchronous v/s asynchronous resets
  • Complete details about asynchronous FIFO operation and gray codes.
  • What is the difference between inertial and transport delays in Verilog?
  • What is ITD, inverted temperature dependence?
  • Make an XOR gate using 2 to 1 MUX.
  • What does the setup time of a flip-flop depend upon?
  • Come up with logic that counts number of ‘1’s in a 7 bit wide vector. You can only use combinational logic.
  • How does a substrate bias on a MOS transistor affect Vt?
  • Divide a clock by 3.
  • You have an input vector where on subsequent clock cycles you get a1,a2,a3,a4 values. You need to output a1,a1+a2,a1+a2+a3 on subsequent clock edges. You’re given a black box which adds two input vectors and generates one output. Assume black box output latency(input to output delay) is two clock cycle. Design this circuit.

Best of all it comes with 100% unconditional money back guarantee. If you’re not satisfied with this product, any time.. yes ANY TIME..for any reason…or even for no reason !!

Just Let Me Know And I’ll Refund Your Money Back With No Questions Asked, No Questions Whatsoever!!

I’ll not ask you to destroy it, I’ll not ask to return it back. I trust you and I believe in my product so much that I stand behind it with such a solid money back guarantee.

Here is what customers have to say.

“I finally found answers to the questions that you find everywhere on all other sites. I recommend this if you’re looking for questions with answers and not just the questions. Do all your preparation, but you need to review VLSIInterviewQuestion set.”

Robert T. Lee(San Jose, CA)

“I was initially skeptical, but I was pleasantly surprised when I was asked the same questions from this set, in my next interview. This set is a must read !”

Phil Nguyen(Austin, TX)

“You’ll not only get answers, but you’ll learn methods as to how you should approach tackling tricky questions. It’s a condensed revision that we all want to do.”

Srinivas Ramasundar(Bangalore, India)

Do not wait!! You’ve posted your resume and have applied for positions, you might get your next phone screen request sooner than you realize, don’t get caught unprepared. This set usually sells for US$19.99, but for a very limited time it’ll be yours for US$9.99 at a 50% discount.

I’ve never offered a deal this generous before, and I can promise that you’ll never see a price this low again !!

Here is how to order :
1. Click on the “Buy Now” button below.
2. It will take you to the checkout page.
3. On the checkout page, you can verify the price of US$9.99 and You’ll enter your personal information(Email,Name).
4. Click on the ‘Purchase’ button at the bottom of the checkout page.
5. This will take you to the paypal server.
6. On the paypal server you can choose to pay using credit/debit card or your paypal account.
7. Once payment is done you’ll be taken to ‘Purchase Conformation’ page.
8. There at the bottom of the page you’ll have option of downloading the Question & Answer document in MS Word or PDF format.

Submit your URL to a quality web directory. We are listed in the Hardware Directory